Septum Piercing Automated for Aqueous Laboratory Tests

10/28/2026

Protecting the integrity of samples is essential for obtaining accurate results, especially for tests that are easily affected by the air and environment.  Septa bottles have caps that protect the sample without capping/uncapping of the bottles. The use of septa caps prevents air entering and leaving the sample. Automating septum piercing frees up analysts’ time from manually processing septa bottles.

What is Septum Piercing?

Septum piercing for laboratory testing is used when septum capped sample vials are utilized to protect the integrity of the sample from the external environment. A needle inserts into the septum cap and then the sample can be transferred, prepared and/or measured. The cap reseals itself once the needle is removed, therefore,nothing can enter or leave the sample vial. A vented needle prevents pressure build up in the vial.

How MANTECH Integrates Automated Septum Piercing

MANTECH is the only manufacturer in Canada capable of automating septum piercing, sample preparation and analysis all-in-one system. An intelligent dosing pump is used to transfer precise volumes of sample to the TitraSip, a separate vessel for multiparameter analysis. This can include, pH, alkalinity, conductivity and more. Flow cell analyses can also occur with sample volumes transferred into the analysis cells for analyses like color and turbidity. Sample preparation (e.g., adding reagents or diluents) can occur in the sample vials, or sample volumes can be transferred to other tubes and prepared within them.

Since the AM500 series autosamplers have two z-arms, they can automate barcode scanning, sample splitting and more in addition to septum piercing. If you’re interested in more options to automate protecting samples from the environment, MANTECH also offers automated uncapping/capping features for field bottles or tubes as well as magnetic caps on the AM500 systems.

Watch the Automated System in Action