Accredited Laboratories.
Confidence in Every Result.

Streamline your laboratory workflow with automated analyzers that deliver reliable results in just 10 minutes, while supporting greener, safer water quality analysis.

Unreliable Data Slowing Workflow?

Traditional testing workflows can be time-consuming, rely heavily on manual steps, and increase the risk of variability between analysts. When laboratories manage high sample volumes, slow turnaround times and inconsistent data handling can make it difficult to maintain efficiency while ensuring compliance and audit readiness.

Benefit From MANTECH Solutions

In a world of strict compliance and tight margins, MANTECH provides the technical edge your laboratory needs to lead.

Gain reliable, real-time insights required for confident decision-making to protect your most valuable assets: your data, your time, and your reputation. These configurable solutions streamline workflows and maximize capacity while slashing operating costs. Join laboratories in 60 countries already meeting the highest accreditation standards with the gold standard in green-method analysis.

MANTECH Solutions
Accredited Laboratories

Our user friendly automated analyzers can be configured to accommodate laboratory operations, automated sampling or continuous process monitoring. Made flexible, efficient, and safe so you can be confident with every test.

Automated Environmental Titration and Multi-Parameter (MT Series) Analyzer

Is Inefficient Workflow Affecting Your Results and Reliability?

Maintaining consistency and compliance is non-negotiable, but managing these requirements alongside high staff turnover and shifting regulations is a constant operational strain. You need the flexibility to adapt to new contracts and analytical needs without the cost or disruption of a complete system overhaul.

Proven Reliability Through Modular Automation

The MT Series allows you to consolidate multiple parameters into a single platform, using Class A liquid handling to perform several tests from a single aliquot. By integrating task-oriented automation like the AM500, you eliminate manual prep errors and prevent cross-contamination across your entire workflow. This modular architecture ensures you generate the highest profit per sample, giving you the speed and adaptability to outperform rigid competitor platforms.

View Solution

Automated Biochemical Oxygen Demand (BOD) Analyzer

Is BOD Testing Straining Your Lab’s Efficiency?

BOD is one of the most cumbersome and time-intensive tests in your lab, yet it is unavoidable when discharge permits are on the line. When you have to balance multiple dilutions for every sample and complex calculations, you aren’t just fighting the clock, you’re also managing an operational strain that risks your consistency.

Optimize Your Laboratory with Scalable BOD Automation

Our BOD systems turn that complex manual workflow into a high-throughput, “set it and forget it” process, taking over everything from pH adjustments to final DO calculations. By integrating the AM500 platform for automated capping and uncapping along with our multi-probe configurations, you can drastically reduce your run times and eliminate the inconsistencies of manual prep. We help you maintain the rigorous accuracy your clients demand while ensuring you generate the highest profit per sample through low-maintenance, compliant automation.

View Solution

Start Optimizing Your Laboratory Today.

Join laboratories worldwide that use MANTECH’S environmentally safe and automated wastewater analyzers.

Contact Us

Related Resources

From tracking organic pollution in complex surface waters to speeding up regulatory compliance using our 10-minute BOD estimator, these case studies highlight how environmental laboratories use MANTECH systems to ensure undisputed accuracy.
Frequently Asked Questions News and Articles

How do the MT Series systems prevent cross-contamination between samples?
The MT series prevents cross-contamination with IntelliRinse™ techology. IntelliRinse™ is beneficial because it uses real-time measurement to provide confirmation that your probes are 100% clean, eliminating chances of cross-contamination. Active IntelliRinse™ systems allows users to set user-defined values (e.g. rinse to a specific conductivity value) or to adjust the rinse intensity based on previous sample concentrations before moving to the next sample. This is beneficial as it improves the rinsing of probes/electrodes to ensure that cross-contamination does not occur even with particularly dirty or high-strength samples. There is also the option to have the final value measured during rinsing shown in a column on the results report, for a visual confirmation directly with sample results.

What is the minimum total liquid volume that can be measured for pH, conductivity and alkalinity with the MT Systems?
When using 50mL sample tubes, the minimum total volume can be as small as 6 ml using the TitraPro4 pH electrode and the MANTECH 5mm conductivity probe. This is due to the lower immersion depth of these electrodes and precise autosampler coordinate specifications. When using 125mL sample cups, the minimum total volume can be as small as 15mL.

What is the time of analysis per parameter and for multi-parameter analysis?
The timing for analysis of different parameters depends on several different factors, like the concentration of the sample and the equipment used. Another factor is the total available sample volume in the vessel on the AutoMax Autosampler bed. With some combinations of parameters, larger sample volume allows for simultaneous measurements, resulting in faster total analysis time than sequential measurement.  A larger sample volume may require a larger sample cup, which decreases capacity on the same model Autosampler.  For example, an AM401 can accommodate 112x50ml tubes, or 62x125ml cups.  In some, the cases the same set of parameters can be analyzed in 2-5 minutes faster when using the 125ml cups vs 50ml tubes. It is important to understand your requirements in terms of capacity and throughput speed, total batch capacity required and/or daily sample loads and if overnight, unattended analyses will be applicable. Individual Parameters
Parameter Average Time of Analysis (Minutes) per Sample
pH 1 – 3
ISE by Direct Measure 1 – 5 depending on sample concentration
Titrations (Alkalinity, Acidity, Hardness) 2 – 5 depending on sample concentration, injection rates and stability control in the titration method.
Conductivity 1 – 2
Colour 2 – 3
Turbidity 2 – 3
Combined Parameters MT10 & MT30 Models
Parameters Estimated Time of Analysis (Minutes) per Sample*
50mL Tubes 125mL Cups
pH-Alkalinity 3 – 4
Conductivity-pH-Alkalinity 3 – 4
Conductivity-pH-Turbidity 4 – 7 3 – 4
Conductivity-pH-Turbidity-Colour (only MT30 for these suit of parameters) 6 – 9 3 – 5
MT100 Model
Parameters Estimated Time of Analysis (incl. TitraSip & RapidAlk)
50mL Tubes 125mL Cups
Conductivity-pH-Alkalinity 3 – 5 3 – 5
Conductivity-pH-Alkalinity-Fluoride 7 – 10 with single TitraSip or 3 – 5 with RapidDuo configuration.
Conductivity-pH-Alkalinity-Turbidity 7 – 10 6 – 8
Conductivity-pH-Alkalinity-Colour 4 – 6 4 – 6
Conductivity-pH-Alkalinity-Turbidity-Colour 8 – 11 4 – 6
 

08/13/2026

How BOD Pro Analyzers Improve the BOD Process

How BOD Pro Analyzers Improve the BOD Process Since the BOD test spans from 5 to 7  days, it’s important to get accurate results, the first...

How BOD Pro Analyzers Improve the BOD Process

Find a Distributor. Upgrade How You Analyze.

Our global distributor network allows you to connect with a local representative. Get expert support and direct access to MANTECH solutions.

Find a Distributor

Join MANTECH
At an Upcoming Event

Connect with us at key international conferences and trade fairs to learn, and advance sustainable science together.
See Events

November

03

Tuesday

iCalendar Google Calendar Outlook

Ecomondo 2026

Find MANTECH with our Italian distributor, FKV in booth B8/314 at Ecomondo 2026 in Rimini from November 3 to 6.

Rimini Expo Center, Via Emilia, 155, 47921 Rimini, RN, Italy

09:30